Review

Patio Cleaners and Sealers Compared: Product Types, Not Brands

The best patio cleaner depends on the stone and the stain. Biocides, bleach-based, acid and pH-neutral cleaners, plus impregnating and film-forming sealers, compared by type.

⏱ 7 min readUpdated 26 October 2026Covers: Indian Sandstone Patio Installation, Patio Repointing
Illustration of a pump sprayer, an unlabelled cleaner container and a sealer tin standing on a patio, with plain comparison cards behind them
No product names on this page

This is a comparison of product categories: what each type of cleaner or sealer does, which surfaces it suits and what it roughly costs to buy. We don't name, test or rank products. Formulations within each category vary, and your paving supplier's care instructions and the product label take priority over anything general here.

Garden centres stock shelves of patio cleaners and sealers, and the labels mostly promise the same thing. Underneath, they fall into a handful of types that work in quite different ways. Picking the wrong one is how sandstone gets bleached, limestone gets etched and a sealed patio turns cloudy. Picking the right one starts with two questions: what's the patio made of, and what are you trying to remove or prevent?

If you're cleaning rather than buying, our guide to cleaning a patio without damaging it covers the method. This page is about the products.

Cleaners

Retail price bands are rough guides for a typical domestic container and vary widely with brand, size and concentration.

TypeWhat it's forSuitsAvoid on or withRough cost
Water and a stiff brushDirt, loose debris, light algaeEverythingNothingFree
pH-neutral stone cleanerRoutine cleaning of natural stoneSandstone, limestone, slate, graniteHeavy growth or old stains, which it won't shiftLow
Biocide, 'apply and leave'Algae, moss, lichen and black spot, killed slowly over weeksMost patiosPonds and planting nearby; follow the labelLow to moderate
Bleach-based (hypochlorite) cleanerFast removal of green algae and organic stainingConcrete, porcelain, some stoneColoured or dark stone, which may lighten; plants; never mix with acidsLow
Acid-based cleanerCement and mortar residue, efflorescence, some mineral stainsPorcelain, granite, some concrete, used carefullyLimestone; many sandstones; anything untestedLow to moderate
Alkaline degreaserBarbecue fat, oil and food stainsMost surfaces, tested firstOlder sealers it may stripLow to moderate
Pressure washer (no chemicals)Ingrained dirt and surface growthPorcelain, concrete; stone with careWeak joints and jointing sand; soft stone at close rangePurchase or hire

Biocides: slow, but safe for the stone

Products sold to kill algae, moss and lichen on patios are biocides, and that's a regulated category in the UK: the label tells you how they may legally be used. The Health and Safety Executive oversees the regime. Many patio biocides are applied and left for rain to work in, killing growth over weeks rather than hours. They're gentle on the stone, which is why they're often the best first step, and the only one that reliably fades black spot on sandstone.

Bleach-based cleaners: fast, with side effects

Hypochlorite cleaners clear green algae and organic stains quickly. They can also lighten coloured stone and concrete, they harm lawns, borders and ponds, and mixing them with acid-based products releases chlorine gas. Fine on a grey concrete patio or porcelain with care; a risk on a dark or warm-toned natural stone.

Acid cleaners: specialist, and risky on the wrong stone

Acid cleaners dissolve cement-based residue, which makes them useful after laying or repointing and for some white salt deposits. The same chemistry attacks limestone directly and can damage sandstones that contain calcite, as well as discolouring others through iron in the stone. They're not a general patio cleaner. If you're using one, it should be a product that names your paving type as suitable, tested on an offcut or a hidden corner first, and followed by a thorough rinse.

Sealers

Sealers are for porous paving. Porcelain doesn't need sealing. Retail bands are rough guides per container and vary with coverage.

TypeHow it worksFinishGripUpkeepRough cost
Impregnating water repellentSoaks into the pores and repels waterNatural; little or no changeLittle changeReapplied every few years; wears away graduallyModerate
Impregnating water and oil repellentSoaks in and repels water and oilsNaturalLittle changeAs aboveModerate to higher
Colour-enhancing impregnatorSoaks in and deepens the stone's colourDarker, richer colour, without glossLittle changeAs aboveModerate to higher
Film-forming (topical) sealerForms a coating on the surfaceSatin to high gloss 'wet look'Can be reduced, especially when wetWears unevenly; usually stripped before renewingModerate

Impregnating sealers

These soak into the stone and line its pores rather than sitting on top, so the surface looks and feels much as it did. They make water bead and slow down staining and algae growth, and the better ones also repel oils, which helps with barbecue and food spills. Because they don't form a film, they don't peel and they wear away gradually, so renewing them is a matter of cleaning and re-applying. For most sandstone and limestone patios they're the lower-risk choice.

Film-forming sealers

These leave a coating on the surface, often with a sheen or a glossy 'wet look' that makes the colours pop. They give strong stain resistance at first, but the coating smooths the stone's texture, so grip can drop in the rain, and as it wears it can scuff, peel or go cloudy in patches. Getting it off before re-sealing usually means a chemical stripper. They're more often used on concrete and some imprinted surfaces than on riven sandstone.

Matching product to paving

  • Porcelain: water, a mild detergent, and a pressure washer used with care for the joints. No sealer.
  • Indian sandstone: a biocide for growth and black spot, a pH-neutral cleaner for routine care, and an impregnating sealer if you seal. Avoid acids unless the product names sandstone as safe and you've tested it. Our guide to sealing a patio explains when it's worth it.
  • Limestone: pH-neutral cleaners and biocides only. No acids. An impregnating sealer is common.
  • Concrete flags: most cleaner types, tested first. Sealing is optional.

If your patio needs these products every year to stay safe underfoot, the growth may be a symptom rather than the problem. Standing water and eroded joints are the usual causes, and fixing them, through repointing or better drainage, will do more than any bottle. The patio repointing cost guide gives typical prices. For a new sandstone patio, sealing is usually priced as part of Indian sandstone patio installation.

Frequently asked questions

What is the best patio cleaner?

It depends on the paving and the problem. A biocide is usually the safest choice for algae, moss and black spot on natural stone. Bleach-based cleaners are fast on concrete and porcelain. Acid cleaners are for cement residue, not general cleaning, and should never be used on limestone.

Can I use an acid patio cleaner on sandstone?

Only with care and only with a product that says it's suitable for sandstone. Some sandstones contain minerals that acids attack or discolour. Test it on an offcut or hidden corner first, and rinse thoroughly afterwards.

Which patio sealer is best, impregnating or film-forming?

For most natural stone patios, an impregnating sealer is the lower-risk choice. It keeps the natural look, changes grip very little and doesn't peel. Film-forming sealers give a glossier finish and strong early stain resistance, but can become slippery when wet and are harder to renew.

Do I need to seal a porcelain patio?

No. Porcelain is non-porous, so a sealer has nothing to soak into and can leave a film or smears.

Ready to talk to an Indian sandstone patio installation specialist?

Get Free Quotes →